Stainless Steel 321 / 321H ROUND BAR Supplier

ASTM A276 STAINLESS STEEL 321 ROUND BARS EXPORTER, UNS S32100 ROUND BARS, SS 1.4541 ROUND BARS, STAINLESS STEEL S32109 ROUND BARS, SS 321H COLD ROLLED ROUND BAR, STAINLESS STEEL 1.4878 ROUND BARS, SS 321 HOT ROLLED ROUND BARS, AUSTENITIC STAINLESS STEEL 321H ROUND BARS, ASME SA479 STAINLESS STEEL 321 ROUND BARS MANUFACTURER IN MUMBAI, INDIA.

Nextgen steel & alloy is a Stockists and provider of all SS 321/321H round Bar and rods within the country and worldwide. Alloy 321 is stabilized stainless steel circular bar, which offers its fundamental benefit as excellent resistance to intergranular corrosion after introducing temperatures within the chromium carbide precipitation extend.

Round Bars

STAINLESS STEEL 321 ROUND ROD, SS 321 RECTANGULAR BARS, SS 321H FORGED BARS, 321 STAINLESS STEEL FLAT BAR, SS 321H SQUARE BAR, SS 321 INDUSTRIAL ROUND BARS, STAINLESS STEEL 321H HEX BAR, 321H STAINLESS STEEL BLACK BAR, SS 321 HOLLOW BAR, STAINLESS STEEL 321H POLISHED ROUND BARS, SS 321-321H ROUND BARS STOCKIST, 321 / 321H STAINLESS STEEL BARS & RODS SUPPLIER IN INDIA.

321 stainless steel round bar is standardized opposite to the arrangement made by chromium carbide the expansion of the titanium. 321 alloy stainless steel round bar is additionally beneficial for elevated temperature because of its remarkable mechanical properties. Three hundred twenty-one round bars of SS offer higher creep and stretch break properties than others. Especially in the grades which can be considered for the exposures where sensitization and intergranular corrosion properties are concerns.

321 H Alloy is a titanium stabilized austenitic stainless steel round bar with extraordinary common erosion resistance. It has excellent resistance to intergranular erosion after introduction to temperatures in chromium carbide precipitation run. The alloy or metal stands up to oxidation and has higher creep and stretch break properties than other metal alloys and offers low-temperature hardness. Amalgam 321H stainless steel round bar is the higher carbon form of the alloy. It was created for upgraded creep resistance and higher hardness at temperatures over. In most occurrences, the substance of carbon of the plate empowers double greatness. 321 H stainless steel round bar cannot be toughened by a warm handle, as it is by cold working. It is effectively melded and prepared by standard shop creation practices. The key highlight of SS 321H is its resistance to inter-granular erosion. It contains titanium. It is used in various industrial applications such as Jet engine parts; Heat treated parts, Expansion joints, Turbo superchargers, Exhaust manifolds, etc., such as stabilizing against chromium carbide arrangement.

At Nextgen steel and alloys, we are working with total effort and confidence to fulfill our customers’ needs. The specifications are the best part of our rods. We are using the best raw materials procured from the authorized vendors. We are doing all the quality testing on our materials, and packaging is also done very carefully to safely deliver the bars and products.

Standard Specifications for Stainless Steel 321 / 321H Round Bars

SS 321/321H Round Bars Standards

ASTM A276, ASTM A479

SS 321 / 321H Round Bars Dimensions

EN, DIN, JIS, ASTM, BS, ASME, AISI

321 / 321H SS Round bar size

Diameter: 3-~800mm

SS 321 / 321H Hex Bar size

2-100mm A/F

SS 321 / 321H Flat bar size

Thickness: 2 -100mm / Width: 10 to 500mm

SS 321 / 321H Square bar size

4 to 100mm

SS 321 / 321H Rectangular Size

33 x 30mm to 295 x 1066mm

SS 321 / 321H Bars Condition

Hardened & tempered, annealed

SS 321 / 321H Round Bars Finish

Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

SS 321 / 321H Round Bars Tolerance

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Stainless Steel 321 / 321H Round Bars Stock

Round Bar

Round Bars

  • SS 321 Round Bar
  • UNS S32109 Round Bars
  • ASME SA 276 / SA 479 Stainless Steel 321H Round Bar
  • Stainless Steel S32100 Round Bar
  • SS 1.4541 Round Bars
  • 321H Stainless Steel Round Bars Supplier
  • SS 321H Round Bars Stockist
  • Stainless Steel 321H Round Bars Exporter
  • ASTM A276/A479 Stainless Steel 321 Round Bar
  • Stainless Steel 1.4878 Round Bar
Square Bar

Square Bars

  • SS 1.4878 Square Bars
  • 321 Stainless Steel Square Bars Supplier
  • SS 321H Square Bars Stockist
  • ASME SA 276 / SA 479 Stainless Steel 321 Square Bar
  • Stainless Steel 1.4541 Square Bars Exporter
  • Stainless Steel 321H Square Bars
  • SS S32109 Square Bar
  • UNS S32100 Square Bars
  • ASTM A276/A479 Stainless Steel 321H Square Bar
Hex bar

Hex Bars

  • 321H Stainless Steel Hex Bars Supplier
  • SS S32100 Hexagon Bars Stockist
  • Stainless Steel 321H Hex Bars Exporter
  • ASME SA 276 / SA 479 SS 321 Hex Bar
  • Stainless Steel 321 Hex Bars
  • SS 321H Hexagon Bar
  • UNS S32109 Hex Bars
  • ASTM A276/A479 Stainless Steel 321 Hex Bar
  • SS 1.4541 Hex Bars
  • SS 1.4878 Hex Bar
Flat Bar

Flat Bars

  • SS 321 Flat Bars Exporter
  • ASTM A276/A479 Stainless Steel 321H Flat Bar
  • Stainless Steel 1.4541 Flat Bars
  • ASME SA 276 / SA 479 Stainless Steel 321 Flat Bar
  • SS 321H Flat Bar
  • UNS S32100 Flat Bars
  • SS 1.4878 Flat Bars
  • 321 Stainless Steel Flat Bars Supplier
  • SS S32109 Flat Bars Stockist
Forged Bar

Forged Bars

  • Stainless Steel 1.4878 Forged Bars Exporter
  • ASTM A276/A479 Stainless Steel 321 Forged Bar
  • Stainless Steel S32100 Forged Bars
  • SS 321H Forged Bar
  • ASME SA 276 / SA 479 Stainless Steel 321H Forged Bar
  • UNS S32109 Forged Bars
  • SS 1.4541 Forged Bars
  • 321H Stainless Steel Forged Bars Supplier
  • SS 321 Forged Bars Stockist
Rectangular Bar

Rectangular Bars

  • 1.4541 Rectangle Bars Supplier
  • SS S32109 Rectangular Bars Stockist
  • Stainless Steel 321 Rectangular Bars Exporter
  • ASME SA 276 / SA 479 Stainless Steel 321 Rectangle Bar
  • Stainless Steel 321H Rectangular Bars
  • SS 321 Rectangular Bar
  • UNS S32100 Rectangular Bars
  • ASTM A276/A479 SS 321H Rectangular Bar
  • SS 1.4878 Rectangular Bars

Contact us to get quote for your requirement.

Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.

ASTM A276 321 / 321H Stainless Steel Round Bars Equivalent Grades

Grade DIN UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

Chemical Composition of Stainless Steel 321 / 321H Round Bar

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Mechanical Properties of Stainless Steel 321 / 321H Round Bars

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Stainless Steel 321 / 321H Round Rods Available Inventory

321 Stainless Steel Forged Bar Exporter

UNS S32109 Round Bar

Stainless Steel 321H Hexagonal Bar

SS 1.4541 Rods Manufacturer in India

Stainless Steel 321H Round Bars Stockholder

UNS S32109 Stainless Steel Rods in India

321 Stainless Steel Forged Round Bars

Stainless Steel 321 Rods In Mumbai

Stainless Steel 321 Cold Finished Bar

Stainless Steel 321H Cold Rolled Bar Exporters

ASTM A479 Stainless Steel 321 Rectangular Bar

321H Stainless Steel Cold Drown Bar

Stainless Steel 321H Precision Ground Bar

SS 321 Hollow Bars Supplier in India

Stainless Steel 321H Hexagonal Rods

Stainless Steel 321 Quenched & Tempered Bar

Stainless Steel 321H Threaded Bar

Polished Stainless Steel 321H Round bar

SS 321 Black Bar Manufacturer in India

321H Stainless Steel Half-Round Bars

SS 321 Continuous Cast Bar at Best Price

Grade 321H SS Industrial Bars & Rods

Stainless Steel 321 Bars & Rods Dealer

Stainless Steel 321H Bright Bar

Searches Related to Stainless Steel 321 / 321H Round Bars

ss 321H flat bar weight chart, price of stainless steel round bar 321, ss 321H round bar supplier in mumbai, stainless steel 321 hex bars supplier, stainless steel 321 square bar sizes, ss 321H round bar suppliers, ss 321 bars price list, ss 321 round bar weight calculator, 321 stainless steel black bar, ss 321H flat bar price, stainless steel 321H bars supplier, stainless steel 321H rods supplier in india, 321 stainless steel triangle bar, ss 321H round bar manufacturer in mumbai, 321H stainless steel round bar price list, stainless steel 321 rods supplier, buy stainless steel round bar 321 online, stainless steel 321H bars supplier, 321 stainless steel round bar price per kg, 321 stainless high tensile steel square bar, austenitic stainless steel 321H bars price list in india, stainless steel 321H price list, ss 321H round bar manufacturer in mumbai, 321 stainless high tensile steel round bar, stainless steel rod 321H price per kg in india, ss 321H rod supplier, sus 321H stainless steel bar, stainless steel 321 hex bar, standard ss 321 round bar sizes in mm, ss 321H black bar manufacturer, stainless steel 321 round bar manufacturers in india, 321 stainless steel threaded bar, stainless steel 321 bars price list, customized size black finish 321H stainless steel forged bar, stainless steel 321 round bar suppliers, ss 321 square bar supplier in india, stainless steel 321H round bar manufacturers in india, stainless steel 321H round bar suppliers in chennai, 321H stainless steel cold drawn round bar, 321 stainless steel half round bar, ss 321 rod manufacturers in india, stainless steel 321H round bar price.

Application of Stainless Steel 321 / 321H Round Bars

Stainless Steel 321 / 321H Round Bars in Oil & Gas Exploration
Oil & Gas Exploration 55%
Stainless Steel 321 / 321H Round Bars in Shipbuilding
Shipbuilding 80%
321 / 321H Stainless Steel Round Bars in Petrochemical
Petrochemical 69%
Stainless Steel 321 / 321H Round Bars in Nuclear Power Plants
Nuclear Power Plants 74%
SS 321 / 321H Round Bars in Food & Dairy Industries
Food & Dairy Plants 85%
321 / 321H SS Round Bars in Chemical Industries
Chemical Industries 60%
Stainless Steel 321 / 321H Round Bars in Pharmaceutical Industries
Pharmaceutical 70%

We Export Stainless Steel 321 / 321H Round Bars Across the Globe

MIDDLE EAST : Saudi Arabia, Iran, Ira, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus

AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon

NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark

EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta

ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia

SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay

We Supply Stainless Steel 321 / 321H Round Bars All over India

Andhra Pradesh : Visakhapatnam, Vijayawada

Bihar : Patna

Chhattisgarh : Raipur

Delhi : New Delhi

Gujarat : Ahmedabad, Surat, Vadodara, Rajkot

Haryana : Faridabad

Jammu and Kashmir : Srinagar

Jharkhand : Ranchi, Dhanbad

Karnataka : Bangalore

Madhya Pradesh : Indore, Bhopal, Gwalior, Jabalpur

Maharashtra : Mumbai, Pune, Nagpur, Thane, Nashik, Kalyan-Dombivli, Vasai-Virar, Aurangabad, Navi Mumbai

Punjab : Ludhiana, Amritsar

Rajasthan : Jaipur, Jodhpur, Kota

Tamil Nadu : Chennai, Coimbatore, Salem, Madurai

Telangana : Hyderabad

Uttar Pradesh : Lucknow, Kanpur, Ghaziabad, Agra, Meerut, Varanasi, Allahabad

West Bengal : Kolkata, Howrah

47, Navnidhi Bhavan, Ground Floor, Shop No. 2, 5th Kumbharwada Lane, Near Moti Cinema, Mumbai 400 004, India.

Mail: [email protected]
[email protected]

Fax: +91 22 2389 2178

Industries