Stainless Steel 304 / 304L Buttweld Fittings Supplier

ASME SA403 304 SS BUTTWELD PIPE FITTINGS, SS 304L PIPE FITTINGS, SS 1.4301 BUTT WELD FITTINGS, STAINLESS STEEL 304L SEAMLESS FITTINGS, STAINLESS STEEL S30403 WELDED FITTINGS, 1.4306 / 1.4307 PIPE FITTING, ANSI B16.9 STAINLESS STEEL 304L BUTTWELD FITTINGS, UNS S30400 BUTTWELD FITTINGS, ASTM A403 WP304 BUTT WELD FITTINGS, STAINLESS STEEL BUTT WELD FITTINGS MANUFACTURER IN MUMBAI, INDIA.

Nextgen Steel & Alloys is an established manufacturer, widely supply SS 304/304L Buttweld Fittings. We offer these SS 304 fittings excellent in opposing corrosion. These fittings are included with a variety of components like Elbow, tees, concentric reducers, stub end, cap, cross, pipe bend with different types such as Seamless, Welded etc. We provide an array of types for various applications to satisfy our customer’s requirements. These fittings are widely accepted for applications in Pharmaceuticals, Petrochemical, Oil and Gas, Aerospace, Chemical, Food industries for equipment’s, fasteners and heat exchanger’s.

Buttweld Fittings

STAINLESS STEEL 304 PIPE CAP, ASTM A403 STAINLESS STEEL 304L TWO JOINT PIPE FITTINGS EXPORTER, 304 STAINLESS STEEL WELDABLE FITTINGS, STAINLESS STEEL 304L CROSS, STAINLESS STEEL 304L PIPE BEND, STAINLESS STEEL 304 TEE, ASTM A403 GR WP304L FITTINGS, SS 304L REDUCER, 304 SS STUB END, STAINLESS STEEL PIPE FITTINGS SUPPLIER IN INDIA, STAINLESS STEEL 304 ELBOW.

These SS 304 Buttweld Fittings are widely acknowledged in various corrosive applications due to their superb corrosion resistance when exposed to different corrosive surroundings. It is highly contested to the pitting as well as crevice corrosion due to chlorides in the environments. These fittings are resistive to stress corrosion cracking at high temperatures. SS 304L Buttweld Fittings are recommended for corrosion resistance in water due to its resistance to carbide precipitation.

Nextgen Steel & Alloys provides these SS 304/304L Buttweld Fittings to utilize in the piping system for joining equipments, changing direction and branch off. These fittings avoid leakage and are welded or threaded to join. SS 304/304L Buttweld Fittings are of different angles depending on system use. Our fitting are finely surfaced inside to allow even flow through and reduces corrosion.

SS 304 is austenitic steel consisting of chromium 18% and Nickel 8-10% with Carbon 0.07% and other elements. Whereas SS 304L differs carbon value reduced percent 0.03. SS 304 and 304L offer similar chemical as well as mechanical properties. SS 304 is versatile thus used widely.

SS 304L Buttweld Fittings have low carbon content and are better welding properties and suitable for severely corrosive environments. These fittings are well-performing in high temperatures. Our fittings are excellently machinable and flexible to adapt to the system.

Nextgen Steel & Alloys is manufacturing top-class SS 304/304L Buttweld Fittings of global standard. We fabricate our buttweld fittings with the latest technology and excellent material. We tend to produce flawless fittings. These fittings are quality tested by our skilled technicians. We offer safe and damage-free delivery of our product.

Standard Specifications for Stainless Steel 304 / 304L Buttweld Fittings

SS 304 / 304L Buttweld Fittings Specifications

ASTM A403/ ASME SA403

SS 304 / 304L Butt Weld Fittings Dimensions

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10

SS 304 / 304L Buttweld Fittings Size

Seamless Butt Weld Fittings : 1/2" - 10" / Welded Butt Weld Fittings : 1/2" - 48" (Seamless & 100% X-Ray Welded, Fabricated)

SS 304 / 304L Buttweld Fittings Type

Seamless / Welded / Fabricated (DN15-DN1200)

SS 304 / 304L Buttweld Fittings Bending Radius

R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

SS 304 / 304L Butt Weld Fittings Thickness

Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

SS 304 / 304L Buttweld Fittings Manufacturing process

Push, Press, Forge, Cast, etc.

SS 304 / 304L Buttweld Fittings Test Certificates

EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report etc.

Stainless Steel 304 / 304L Buttweld Fittings Stock

Elbow

Elbow

  • A403 WP304 Butt weld Elbows
  • UNS S30400 Elbows
  • ASME B16.9 SS 304L Elbow Exporter
  • Stainless Steel 304 180 Degree Buttweld Elbow
  • SS 1.4301, 1.4307 Elbows
  • Stainless Steel 304L 45° Buttweld Elbow
  • Stainless Steel 304 90 Deg Elbow
  • SS 304 5D Elbow
  • 304/304L Stainless Steel Seamless Elbows Supplier
  • SS 304L Welded Elbows Stockist
  • ASME SA403 WP304 Stainless Steel Elbows
  • ASTM A403 Stainless Steel 304 Pipe Elbows
  • S30403 Stainless Steel 3D Elbows
Buttweld Tee

Tee

  • ASME B16.9 SS 304L Tee Exporter
  • A403 WP304 Butt weld Tee
  • 304L Stainless Steel Seamless Tee Supplier
  • UNS S30400 Tee
  • SS 304L Welded Tee Stockist
  • Stainless Steel ASTM A403 WP304 Tees
  • ASME SA403 Stainless Steel 304 Tee
  • Stainless Steel 304L Equal Tee
  • Stainless Steel 304 Pipe Tee
  • SS 1.4306 Tee
  • Stainless Steel S30403 Unequal Tee
  • Stainless Steel 304/304L Reducing Buttweld Tee
Buttweld Cross

Cross

  • SS 304 Two Joint Cross
  • SS S30403 Welded Cross Stockist
  • ASME B16.9 SS 304 Cross Exporter
  • SS 1.4307 Cross
  • 304L Stainless Steel Seamless Cross Supplier
  • A403 WP304 Butt weld Cross
  • UNS S30403 Cross
  • ASTM A403 Stainless Steel WP304 Cross
  • ASME SA403 Stainless Steel 304 Cross
  • Stainless Steel 304 Reducing Buttweld Cross
  • Stainless Steel 304/304L Equal Cross
  • Stainless Steel S30400 Unequal Cross
REDUCER

Reducer

  • ASME SA403 Stainless Steel 304/304L Reducer
  • A403 WP304 Butt weld Reducer
  • SS 1.4306 Reducer
  • Stainless Steel S30403 Pipe Reducer
  • Stainless Steel 304 Eccentric Reducer
  • UNS S30400 Reducer
  • ASME B16.9 SS 304L Reducer Exporter
  • 304 Stainless Steel Seamless Reducer Supplier
  • Stainless Steel 304L Concentric Reducer
  • SS 304 Welded Reducer Stockist
  • ASTM A403 Stainless Steel 304L Reducer
Buttweld Cap

Pipe Cap

  • SS S30400 Welded Caps Stockist
  • A403 WP304 Buttweld Cap
  • ASME B16.9 SS 304/304L Caps Exporter
  • UNS S30403 End Caps
  • SS 1.4307 Pipe Cap
  • Stainless Steel ASME SA403 WP304 Cap
  • 304 Stainless Steel Seamless Cap Supplier
  • ASTM A403 Stainless Steel 304 Pipe Cap
  • Stainless Steel 1.4301 Pipe End Cap
Buttweld Pipe Bend

Pipe Bend

  • ASME B16.9 SS 304L Bends Exporter
  • UNS S30400 Piggable Bends
  • SS 304L Welded Long Radius Bends Stockist
  • A403 WP304 Butt weld Bend
  • ASME SA403 Stainless Steel 304/304L Buttweld Pipe Bend
  • SS 1.4301 U Bend
  • 304 Stainless Steel Seamless Bend Supplier
  • ASTM A403 Stainless Steel S30403 Pipe Bend
Buttweld-stub-end

Stub End

  • SS 1.4301 Short Stub End
  • ASME SA403 Stainless Steel 304 Pipe Stub End
  • 304/304L Stainless Steel Seamless Stub End Supplier
  • UNS S30403 Long Stub Ends
  • SS S30400 Welded Lap Joint Stub Ends Stockist
  • ASTM A403 Stainless Steel 304 Stub End
  • ASME B16.9 SS 304L Stub Ends Exporter
  • A403 WP304 Butt weld Stub End
Buttweld Pipe Nipple

Pipe Nipple

  • UNS S30400 Pipe Nipples
  • SS 1.4307 Pipe Nipple
  • A403 WP304 Butt weld Nipple
  • ASME B16.9 SS 304L Pipe Nipples Exporter
  • ASTM A403 Stainless Steel S30403 Pipe Nipple
  • ASME SA403 Stainless Steel 304/304L Pipe Nipple
  • 304 Stainless Steel Seamless Nipple Supplier
  • SS 304L Welded Nipples Stockist
Contact us to get quote for your requirement.
Our worldwide presence ensures the timeliness, cost efficiency and compliance adherence required to ensure your production timelines are met.

ASTM A403 WP304 / 304L Stainless Steel Butt Weld Fittings Equivalent Grades

Grade DIN UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18-09 X5CrNi18-10
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18-10 X2CrNi18-9 / X2CrNi19-11

Chemical Composition of Stainless Steel 304 / 304L Welded Fittings

Grade C Mn Si P S Cr Mo Ni
SS 304 0.08 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 8 – 11
SS 304L 0.035 max 2.0 max 1.0 max 0.045 max 0.03 max 18 – 20 8 – 13

Mechanical Properties of Stainless Steel 304 / 304L Buttweld Fitting

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Stainless Steel 304 / 304L Butt Weld Fitting Available Inventory

Austenitic Stainless Steel 304L Pipe Fittings

Suppliers of 304 Stainless Steel End Pipe Cap

SS 304L Buttweld Reducing Nipple Supplier

Stainless Steel 304 Pipe Cap In Mumbai

SS 304 / 304L 90° Seamless Elbow Exporters

Stainless Steel 1.4301 Pipe Fittings Dimensions

Stainless Steel 304 LR Elbow Stockholder

Stainless Steel 304L 10D Elbow in India

ASTM A403 WP304 / 304L Eccentric Reducer at Best Price

Sch 80 Stainless Steel 304L Pipe Fittings

SS 304 Seamless Fittings Supplier in India

Stainless Steel 304L Weldable 1.5D Elbow

Stainless Steel 304 / 304L 1D Elbow Stockists

Stainless Steel 304 5D Elbow

ASTM A403 WP304 Unequal Cross at Best Price

Stainless Steel 304 / 304L 180° LR Return Bend

SS 304 Industrial Buttweld Pipe Fittings

SS 304 / 304L Reducing Tee Manufacturer in India

Stainless Steel 304L Barred Tee

A403 WP304 Two Joint Pipe Fittings

SS 304 / 304L Short Radius Elbow Exporter

SS 304L Lap Joint Stub Ends

Stainless Steel 304 / 304L SR Elbow

ANSI B16.9 Stainless Steel 304 / 304L Pipe Cap

Searches Related to Stainless Steel 304 / 304L Buttweld Fittings

stainless steel buttweld pipe fittings, stainless steel 304 180 deg bend, stainless steel weldable pipe fittings, ss 304l reducer, ss 304l pipe fittings supplier, asme sa403 stainless steel 304 pipe nipple, inox 304L pipe elbow, stainless steel weldable fittings, stainless steel 304 pipe fittings manufacturers in india, 304l stainless steel 3d elbow, ss pipe fittings manufacturers in india, stainless steel buttweld fittings dimensions, ss 304 short radius elbow stockholder, 304l ss elbow, schedule 10 ss 304l fittings, ss 304 90° sr elbow, astm a403 wp304 ss 180° return bends, ansi b16.9 stainless steel 304 butt weld nipple, asme sa403 wp 304 90° lr elbow, stainless steel 304 reducing nipple, stainless steel 304l pipe fittings suppliers, 304 stainless steel astm a403 fittings price list in mumbai, ss 304 5d elbow, astm a403 304 stainless steel pipe fittings, 304l stainless steel straight cross, stainless steel 304l butt weld pipe elbow manufacturer in india, grade 304l stainless steel buttweld fittings dimensions, ss 304l long radius bend, ss 304 pipe fittings price list, ss 304l schedule 40 pipe fittings, ss astm a403 wp 304l swage nipple, stainless steel 304/304l pipe fittings price, astm a403 wp 304 stainless steel buttweld fittings india, ss 304l din equivalent buttweld fittings, stainless steel 304 weldable pipe fittings, ss 304/304l seamless 45 elbow, stainless steel 304 welded fittings, ss 304l elbow 90 deg, stainless steel 304 seamless elbow, ss 304l pipe fittings catalogue, ss 304l pipe fittings exporter in mumbai, stainless steel 304l buttweld elbow price, stainless steel 304 pipe fittings, 304/304l stainless steel pipe fittings manufacturers in mumbai, 304 stainless steel welded elbow dimensions, stainless steel 304L piggable bend supplier in india, stainless steel 304l seamless pipe fittings exporter, stainless steel 304l welded pipe elbow, stainless steel 304 industrial pipe fittings dealer.

Application of Stainless Steel 304 / 304L Buttweld Fittings

Stainless Steel 304 / 304L Buttweld Fittings in Oil & Gas Exploration
Oil & Gas Exploration 86%
Stainless Steel 304 / 304L Buttweld Fittings in Shipbuilding
Shipbuilding 56%
Stainless Steel 304 / 304L Welded Fittings in Petrochemical
Petrochemical 84%
Stainless Steel 304 / 304L Pipe Fittings in Nuclear Power Plants
Nuclear Power Plants 71%
Stainless Steel 304 / 304L Buttweld Fittings in Food & Dairy Industries
Food & Dairy Plants 73%
Stainless Steel 304 / 304L Butt Weld Fittings in Chemical Industries
Chemical Industries 81%
Stainless Steel 304 / 304L Buttweld Fittings in Pharmaceutical Industries
Pharmaceutical 57%

We Export Stainless Steel 304 / 304L Buttweld Fittings Across the Globe

MIDDLE EAST : Saudi Arabia, Iran, Ira, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus

AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon

NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark

EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta

ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia

SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay

We Supply Stainless Steel 304 / 304L Butt Weld Fittings All over India

Andhra Pradesh : Visakhapatnam, Vijayawada

Bihar : Patna

Chhattisgarh : Raipur

Delhi : New Delhi

Gujarat : Ahmedabad, Surat, Vadodara, Rajkot

Haryana : Faridabad

Jammu and Kashmir : Srinagar

Jharkhand : Ranchi, Dhanbad

Karnataka : Bangalore

Madhya Pradesh : Indore, Bhopal, Gwalior, Jabalpur

Maharashtra : Mumbai, Pune, Nagpur, Thane, Nashik, Kalyan-Dombivli, Vasai-Virar, Aurangabad, Navi Mumbai

Punjab : Ludhiana, Amritsar

Rajasthan : Jaipur, Jodhpur, Kota

Tamil Nadu : Chennai, Coimbatore, Salem, Madurai

Telangana : Hyderabad

Uttar Pradesh : Lucknow, Kanpur, Ghaziabad, Agra, Meerut, Varanasi, Allahabad

West Bengal : Kolkata, Howrah

47, Navnidhi Bhavan, Ground Floor, Shop No. 2, 5th Kumbharwada Lane, Near Moti Cinema, Mumbai 400 004, India.

Mail: sales1@ng-steel.com
mfg@ng-steel.com

Fax: +91 22 2389 2178

Company

Industries

Products